What You Need To Know About Furnace Installation in Keller
Furnace installation usually isn’t your typical do-it-yourself everyday job. Some tricks in the installation processes are better known by a professional HVAC contractor. Understanding the basics that make a furnace function inside your home is equally important.
These days, there are various furnace types available on the market. A few examples include natural gas types, electric, oil and propane. Choosing the right furnace type should depend on the most convenient fuel source for your area.
After you have finally decided on the type that would work best in your Keller home, you should take the time to familiarize yourself with furnace operations. Most of today’s furnaces work the same way; they draw all the room air into duct-work positioned through air returns. These are holes covered by protective registers, and it allows room air to enter. Air return holes are normally larger than heating registers that functions to return warmed air into and throughout the room.
As room air enters the duct-work, it then travels all the way down into the furnace. Once inside, a metal box containing the heating source activates. With an electric furnace, the box contains a certain heating element to heat the air. Other types with their heating sources employ pilot lights and burners. Room air enters into the furnace, which is then heated through the box. The air automatically travels back out through the other side of the box into the duct-work and finally back into the room.
As you can see it takes a complex system of elements that make the operation of heating your home a complete process. When having a furnace installed, not only must you see to it that your furnace unit is properly fitted, but also that the duct-work that allows for air to pass through must also be fixed firm in place and installed properly. If you plan on having your old furnace replaced, then you should take the time and effort to examine your existing duct-work first. Even those available high-efficiency furnace systems will not perform properly and efficiently if there are problems that plague your existing duct-work.
Duct-work, to begin with, must be attached solidly into each of the registers, and most especially into those areas where it will split and head into other directions. You can do your part by making sure that no air will escape by feeling each area where connections are made. Metal duct-work, on the other hand should be fully insulated in its entire length; this will prevent heated air from cooling off upon returning to the room.
Furnace installation in Keller homes without an existing furnace is very big work, with the most critical and labor-intensive part going to the duct-work and registers installation. An certified Keller HVAC contractor will have to plan out the duct-work layouts carefully, taking into consideration that the positions and passageways should not be obstructed by house furniture. The furnace installation’s final component will be its exhaust systems. The exhaust types that the furnace needs again depend on the fuel that you will be using. A properly outfitted exhaust system is vital for the overall success of your new furnace.